| Dry Suit Divers are alway searching for the smallest possible regulator to use for their argon inflation bottle. Highland Millworks has delivered just such a regulator. The NEW Highland Argon Dry Suit Inflation Regulator is the smallest regulator designed specifically for dry suit inflation. The DIN First Stage Argon regulator is designed to fit all 300, 232, and 200 Bar DIN outlets. The regulator is fitted with two low pressure ports and one high pressure port, which makes the tiny regulator ideal for the job. The intermediate pressure of the regulator is factory set at 120psi outlet pressure and there in an Over Pressure Valve (OPV) is installed in one low pressure port. Additionally, the regulator is shipped with a 22" EZ Quick Disconnect Inflator Hose in the second LP port. The regulator, opv, and 22" inflator hose are combined in this package to give you an all in one solution for your argon inflation setup. If you've been looking for the ideal argon regulator, look no further than the Highland Millworks Argon Dry Suit Inflation Kit. |